Here are some tips for printing on cardstock or heavier pound paper:

• Use the bypass tray to feed any paper that is not ‘Plain & Recycled’ paper. This will prevent the paper from bending.

• Select 'thick 1' or 'thick 2' when printing on card stock or printing in full color. This will slow down the printing process, which allows the copier to fuse the toner to the paper properly.

• If printing labels, they MUST go through the bypass & you must choose the ‘label’ paper type (screenshot below)

Not following these steps may result in print quality issues such as toner smear, bruising, paper jams, and print quality issues for the next few print jobs.

At the computer settings